a毛片免费全部播放无码杨_在线欧美三级在线高清观看_印度一级婬片A片AAA毛片_午夜五月天,无码qv在线免费观看,色欲天天综合人妻无码系列,国产一级A片大免费男的欠债,久久免费精品五月天婷婷狠狠 ,丰满熟妇乱又伦,热玖玖,人妻 亚洲

進口耐酸堿磁力泵

產品描述 Description

a.泵頭與電機連接腳為一體。穩定牢固,，使用壽命長,，維護、拆卸更加簡單方便,。
b.磁力驅動,。無軸封設計。密封性好。不會造成化學品泄漏,。
c.葉輪與內磁一體成型,。加強葉輪。提高效率
d. 組合式射頻法蘭,，螺絲孔方向可調,。除了提供管道便利外，還可以避免 管道壓力造成 法蘭變形而造成泄漏,。
e.通過 設置被動磁鐵和主動磁鐵的相對位置,，可以有效控制磁囊的位置,。即使空轉時,，軸承后端也不會接觸后止推環。保證摩擦部位的潤滑,。

f.泵的前后殼設計有局部蝸殼形狀,。組裝形成了腔室整體理想的螺旋形狀。有效抑制葉輪液體回流泵腔造成的泄漏現象,。因此,，液體被平穩且有效地引導至泵出口。

優點 Advantage

1.無水空轉,不會損壞水泵 在下面 無所事事,。
2.獨特的液體密封設計.它能有效地防止液體對電動機的損害,。 倒流 因?yàn)樗查g的電動 閉。
3.渦流流道設計,充分利用流體力學原理,提高流動速度,提高效率,。
4.高效水利設計,。通過流體分析,可以掌握流體的流動特性,以減少流動力的損失。提高葉片流動效率.
5.采用國際A級PP原料,耐高溫,耐腐蝕性更強,。
6.在電機輸出軸和泵底部分別安裝耐酸和耐堿密封,。雙層保護防止化學氣體損壞電機軸承。

進口耐酸堿磁力泵選型 product selection

類型:MSH系列

頻率:50 hz / 60赫茲

電壓：380V/220V/460V

流量:32L/min ~ 875L/min

揚程:3.8 ~ 31m

溫度:0 ~ 76°C (FRPP材質),0 ~ 101°C (PVDF)

MSH磁力泵系列規格 Series specifications

磁力泵故障排除：Magnetic pump troubleshooting

1.壓力不足
如果磁力驅動泵的壓力不足,，這通常是由四個問題之一引起的,。
檢查被泵送的流體中有無空氣或氣體。
確認葉輪直徑不太小,。
確認系統水頭不低于預期值,。
檢查電機轉速是否不足或電機旋轉是否不正確。

2.排放不足
如果沒有排放或排放不足,，這可能是由磁力驅動泵的幾個常見問題之一引起的,。檢查這些變量中的每一個，并進行必要的校正,，以恢復足夠的流量,。

吸入管路中可能存在空氣泄漏。
泵可能沒有加注。
系統水頭可能高于預期,。
閥門可能關閉,。
粘度或比重可能過高。
吸入升程也可能過高,。
吸入管路或葉輪葉片可能堵塞,。
電機旋轉可能不正確。

3.素?cái)?shù)丟失
潛在原因包括吸入管路泄漏,、流體中的空氣或氣體,、底閥泄漏、葉輪中的異物或閥門泄漏,。此外,，底閥或吸入口可能沒有充分浸沒，或者吸入揚程可能過高（可用的凈正吸入壓頭）不足,。

4.功耗過高
當磁驅動泵消耗過大功率時,，這通常是由以下幾個問題之一引起的。檢查流量是否過大,，確認水頭不低于額定值,，并確認比重和粘度不過高。

5.振動/噪音
雖然磁驅動泵的運行預計會產生一些噪音,，但過大的噪音可能是某些部件工作不正常的潛在危險信號,。檢查葉輪中是否有異物。確保電機和管道正確固定,。查看驅動器磁鐵是否有摩擦,。 ，檢查吸入或進給是否不當,，這可能會導致泵氣蝕,。
1. Insufficient pressure
If a mag drive pump is experiencing insufficient pressure, this is typically caused by one of four issues.

Check for air or gas in the fluid being pumped.
Confirm that the impeller diameter is not too small.
Verify that the system head is not lower than anticipated.
Check to see if the motor speed is insufficient or if the motor rotation is incorrect.
2. Insufficient discharge
If there is no discharge or insufficient discharge, this can be caused by one of several common problems with a mag drive pump. Check each of these variables and make necessary corrections to restore sufficient discharge.

There may be air leaks in the suction piping.
The pump might not be primed.
The system head may be higher than anticipated.
The valve may be closed.
The viscosity or specific gravity may be too high.
The suction lift might also be too high.
The suction line or impeller vanes may be clogged.
The motor rotation may be incorrect.
3. Loss of prime
Potential causes include a leaking suction line, air or gas in the fluid, a leaking foot valve, foreign matter in the impeller, or a leaking valve. Additionally, the foot valve or suction opening may not be sufficiently submerged, or the suction lift may be too high or insufficient (net positive suction head available).

4. Excessive power consumption
When a mag drive pump is consuming excessive power, this is usually caused by one of several issues. Check for excessive flow, verify that the head is not lower than the rating, and confirm that the specific gravity and viscosity are not too high.

5. Vibration/noise
While some noise is expected from mag drive pump operation, excessive noise is a potential red flag that something may not operating correctly. Check for foreign objects in the impeller. Ensure the motor and piping are properly secured. Look for drive magnet rubbing. Lastly, check for improper suction or feed, which can cause pump cavitation.